| PowerSupply1State |
| This variable shows the state of the power supply. Enumerations: - missing (1)
- off (2)
- running (3)
- fail (4)
|
| PowerSupply1Temp |
| This variable shows the actual power supply temperature in the unit Celsius. Range: 0 to 250 |
| PowerSupply1TempAlarmThreshold |
| Power supply 1 temperature threshold. Range: 0 to 250 |
| PowerSupply1TempAlarmTrap |
| If the power supply temperature raises above the threshold, a alarm trap is generated every 60 seconds. Enumerations: |
| PowerSupply2State |
| This variable show the the state of the power supply. Enumerations: - missing (1)
- off (2)
- running (3)
- fail (4)
|
| PowerSupply2Temp |
| This variable shows the actual power supply temperature in the unit Celsius. Range: 0 to 250 |
| PowerSupply2TempAlarmThreshold |
| Power supply 2 temperature threshold. Range: 0 to 250 |
| PowerSupply2TempAlarmTrap |
| If the power supply temperature raises above the threshold, a alarm trap is generated every 60 seconds. Enumerations: |
| FanControl |
| This variable defines automatic fan control. In mode 'auto' the fans are automatically adjusted depending on the current temperature. In mode 'high' all fans remain at maximum speed. Enumerations: |
| FanVersion |
| This variable shows the firmware version of the fan unit. Range: 0 to 255 |
| Fan1 |
| This variable shows the current turning speed. |
| Fan2 |
| This variable shows the current turning speed. |
| Fan3 |
| This variable shows the current turning speed. |
| Fan4 |
| This variable shows the current turning speed. |